Robot - Configuring activity feeds

robot

2024.10

false

Robot admin guide

Configuring activity feeds

NuGet.config file locations and instructions for adding or removing activity feeds for Service Mode and User Mode robots.

Service Mode and User Mode robots use different NuGet.config files.

A robot installed in User Mode has two NuGet.config files: one in the installation folder, and one in the user profile folder (%AppData%\NuGet\NuGet.config).

A robot installed in Service Mode uses the NuGet.config file from the installation folder.

To add or remove activity feeds, update any NuGet.config file, as follows:

Open the NuGet.config file with a text editor, such as Notepad++.
To add a new activity feed, in the <packageSources> section, add a new <add/> element, and provide the name as key, and the feed address as value:
```
<packageSources>
    <add key="nuget.org" value="https://api.nuget.org/v3/index.json" />
    <add key="Online Feed" value="https://mycustomfeed.com" />
    <add key="Local Feed" value="C:\local feed" />
</packageSources>
<packageSources>
    <add key="nuget.org" value="https://api.nuget.org/v3/index.json" />
    <add key="Online Feed" value="https://mycustomfeed.com" />
    <add key="Local Feed" value="C:\local feed" />
</packageSources>
```
Note:
- You can add both local and online feeds.
- To ignore HTTPS feeds from NuGet.config, add the following line in UiPath.config, under <packageSettings>:
<add key="skipHttpConfigurationSources" value="true" /><add key="skipHttpConfigurationSources" value="true" />
To remove an activity feed, delete the corresponding <add/> tag.
Save the NuGet.config file, then restart the Robot service or the device.

Was this page helpful?

PREVIOUSSetting up package folders and network paths

NEXTUsing EntraID users with multifactor authentication (MFA) for unattended robots